Skip to content
  • There are no suggestions because the search field is empty.

METHOD: Printing with Nylon and PETG

This article pertains specifically to build plate adhesion concerning Nylon, Nylon Carbon Fiber, Nylon 12 Carbon Fiber and PETG 

Preliminary information:
Be sure to use the glue stick that shipped with your spool of filament, otherwise unfortunately  the material will not do a good job of sticking to the build plate.
If you are using the glue stick that shipped with your spool of filament, maker sure you are cleaning the build plate after each print to avoid a build up of residue

 

Check out the video guide below for more information about printing with Glue Stick